Mosquito Enterprises, Inc. Logo design by Lundgren's Select Watercolors & Cards www.selectwatercolors.com


HULLS - complete descriptive information on the 26' Mosquito hull suitable for small steamboats and steam launches

HOME

COMPANY - who we are and what we're about

ENGINES - our 3 + 6 x 4 tandem vertical compound marine engine

BOILERS - we offer several sizes and types and can have them built to ASME code

USED - used equipment we have acquired and offer for sale.

LINKS  - some interesting steamboating sites, including our competitors

CONTACT - if you have viewed this entire website and wish to order or obtain additional information



MOSQUITO - 26' LOA x 8' Beam x 2'6" Draft
Mold taken from a 1945 U. S. Coast Guard Motor Surf Boat

Mosquito is a hull you can do something with

This is a wonderful size boat. You can do something with a 26-footer. She's easy to handle, but big enough for two to sleep under the stars; big enough to smuggle a load of contraband or pack a load of supplies to that vacation cabin, to entertain clients, go fishing or crabbing. If you need cover, she's big enough to build a cabin.

Suggested cabin design by Lorne Garden

This is a sketch of a proposed cabin design by noted Naval Architect Lorne Garden. And if you doubt she's stable enough to handle a "house" of this size, take a look at the following photo.

Mosquito with a load of bathing beauties

Most folks can stand on the gun'l and barely tip the boat! She's nimble and dry, even in "lumpy" seas, and can safely carry 10 or more adults. Great for tours and charters.

A bare hull on a trailer, waiting for the new owner to pick her up

If you were thinking of a 23' boat, why not have a 26' boat on the same 8' wide trailer. Notice that this "bare" hull easily rests on this single axle trailer. Note also the large aperture which accommodates up to a 23" dia. propeller and "monkey" rudder - allowing the hull to "back" in a straight line!

The hull with deck & combing attached

We can also provide a fiberglass deck and coaming ( as seen above ) for those who wish an enclosed cockpit or a cabin.

One of the canopies we have provided as fitted to S.L. Tiamat

We wish everyone lived in a place where no protection from the elements was needed - but, unfortunately, that's not the case. So we have designed a durable, fiberglass canopy which goes nicely with the hull and deck lines. It will accept sidecurtains for those days when the wind is really blowing the rain, or keep in boiler warmth for a Winter excursion.

SPECIFICATIONS

Length Overall - 26 feet
Length Waterline - 24 feet
Beam - 8 feet
Draft - 2.5 feet
Weight - 1,000 lbs. ( bare hull )
Speed - 7+ knots with a 14HP engine
Propeller - 23" dia. maximum

Particulars of the machinery installed in S.L. Mosquito may be found HERE

FIBERGLASS LAYUP

HULL
    white Gel-Kote
    1-1/2 oz. mat -- Skin-Kote
    1-1/2 oz. mat + 1 mil core mat + 18oz. roving
    1-1/2 oz. mat + roving = 1-1/2 oz. mat
    stringers full bottom lay-up

DECK & COAMING
    Gel-Kote
    1-1/2 oz. mat -- Skin-Kote
    1-1/2 oz. mat + 1 mil core mat
    1-1/2 oz. mat + 1/2" balsa + 1-1/2 oz. mat

CANOPY
    Gel-Kote + 1-1/2 oz. Skin-Kote
    1-1/2 oz. mat + 1 mil core mat
    1-1/2 oz. mat + 18 oz. roving + 1-1/2 oz. mat

PRICES

Bare hull, fiberglass with white Gel-Kote exterior and two longitudinal stringers:
    $ 8,000
Additional cost for colored hull:
    $ 135

Hull (as above) with Deck and Coaming attached, ready for guards:
    $ 11,000

Fiberglass Canopy - stanchions and installation are NOT included:
    $ 2,850

All prices are in US funds and F.O.B. Everett, Washington, USA.
Prices are subject to change without notice.