Victorian Freight/Passenger Depot
The model is representative of structures found on many eastern and mid-western railroads circa the 1890's into the mid 1900's ,some are still in use today. Parts are laser cut from hardwoods. Features include decorative end and bay trims, corbels, peel and stick windows, REAL-LIKE SHINGLES roll roofing with grit. It is scale 40 feet long by 16 feet wide. O scale kit #403 $86.00, S Gauge kit #303 $75.00, HO scale kit #203 $45.00 plus shipping.
On30 Clearance Gauge
Check platform clearance, right of way, and tunnel clearance.
The Clearance Gauge is made of acrylic, laser cut for accuracy.
It retails for $5.00 plus $2.00 Shipping.
BOARD FENCES
For industrial Security or just for the neighbors in your towns to talk over. In Square cut or Octagon, 4, 6, or 8 feet high. All kits have enough material for approximately 96 scale feet of fence. O scale kits Square cut 8ft. #111-8O $14.95, 6ft. #111-6O $10.95, 4ft. #111-4O $6.95, OCTAGON 8ft. #112-8O $14.95, 6ft. #112-6O $10.95, 4ft. #112-4O $6.95.
S scale kits 8ft. #111-8S sq. cut $12.95, 6ft. #111-6S sq. cut $8.95, 4ft. sq. cut #111-4S $5.95. OCTAGON 8ft. #112-8S $12.95, 6ft. #112-6S $8.95, 4ft. #112-4S $5.95.
HO scale kits Square cut 8ft. #111-8HO $9.95, 6ft. #111-6HO $5.95, 4ft. #111-4HO $3.95, OCTAGON 8ft. #112-8HO $9.95, 6ft. #112-6HO $5.95, 4ft. #112-4HO $3.95.
Plus shipping to order see bottom of page.
Novembr 2, 2003 Trainmaster Shows, Parma High School, Parma, OH. 10 AM to 2:30 PM.
December 14, 2003 Trainmaster Shows, Eastlake High School, Eastlake, OH. 10 AM to 2:30 PM.
February 8, 2004 Trainmaster Shows, Parma High School, Parma, OH. 10 AM to 2:30 PM.
It has been brought to our attention that in the instruction sheet for our kit #217, instruction #6, it reads "Now take the two single beams and the double beam and glue the eyes in the two end holes turn them so that the eye is vertical. Next take two eyes and open them slightly these eyes are glued in the center hole on the single beams in the horizontal position, then hooked in the eyes on the double beam, and then closed again." It should read "Now take the double beam and glue eyes in the two end holes."
Also when applying our REAL-LIKE SHINGLES they shape and stick even better if you warm them with a 100 watt light bulb hung about 18 inches above them. After you have them in place use a jewlers screwdriver (flat blade about 1/16 wide) to stick them down by draging it over the shingles in the direction of the row.
Model Tech Inc. is now an authorized dealer for NCE Electronics DCC control systems. You can check out NCE on the web at ncedcc.com
take you back to the home page
Model Tech, Inc. HOME
To order call or write Model Tech, Inc. at 1-800-264-9845
7289 Westfield Road, Medina, OH 44256
UPDATED 10/17/2003
