RTS-11* Physical Characteristics

RTS-11 Drawing


Number of Pins: 14
Pin Circle Diameters
  Outer: 12.7mm (0.500")
  Inner: 5.4mm (0.212")
Pin Diameter:1.02mm (0.040")
Pin Spacings 
  Outer Circle:10 × 36°
  Inner Circle:4 × 90°
Alignment Method: Pin Geometry
 
Pins 4, 12, 14 and 9 fall on a straight line. Tubes and sockets can be mated in two orientations. Dot on socket indicates front of tube.


NOTES:
* I do not yet know any correct designation for this tube base type; "RTS‑11" is the part number of a compatible socket.

Pins are shown as looking at the base of the tube; i.e. "bottom view" for the majority of tubes with this base. (Top view for inverted side‑viewed tubes.)