SK‑207* Physical Characteristics
|
|
|
|
|
| Number of Pins: | 14 |
| Pin Diameter: | 0.394mm (0.0155") |
| Pin Configuration: | See dimensional drawing above, right. 0.018" = 0.46mm 0.090" = 2.29mm 0.097" = 2.46mm |
| Alignment Method: | Pin Geometry - note off-center position of outer pins. |
NOTES:
* I do not yet know any correct designation for this tube base type; "SK‑207" is the part number of a compatible socket.
Pins are shown as looking at the base of the tube; i.e. "bottom view" for most tubes having this base type - with lead spreader/standoff in place.