--------------------------------------------
	.: Taken from "CCIE Practical Studies Volume 1" :.
	   --------------------------------------------
   	           .: Page 761 (Karl Solie) :.
	             ---------------------

Physical           |              | Static   |         | Desired  | 
Interface          | Default OSPF | Neighbor | DR/BDR  | Neighbor | Priority 
Type               | Network Type | Needed   | Elected | State    | Recomended
-------------------|--------------|----------|---------|----------|------------
Broadcast Media    | Broadcast*   | No       | Yes     | FULL/DR  | Yes
(Eth, Token, Etc.) |              |          |         | FULL/BDR |
                   |              |          |         | FULL/-   |            
-------------------|--------------|----------|---------|----------|------------
Frame Relay        | NMBA         | Yes      | Yes     | FULL/-   | No
natural or         |              |          |         | DROTHER  |
multipoint         |              |          |         |          |
-------------------|--------------|----------|---------|----------|------------
Frame Relay        | Point-to-    | No       | No      | FULL/-   | No
point-to-point     | point        |          |         |          |
-------------------|--------------|----------|---------|----------|------------
Frame Relay        | Point-to-    | No       | No      | FULL/-   | No
multipoint         | multipoint** |          |         |          |
-------------------+--------------+----------+---------+----------+------------

	* If the OSPF network type on a Frame Relay network is changed to
	  BROADCAST, it will have a DR and BDR election and priority should 
	  be set.

	** The OSPF network tyhpe of point-to-multipoint is not the default
	   type of any interface.  OSPF point-to-multipoint netowrks must be
	   statically configured.